NEWS

Technical Support

Industry News

Company Dynamics

The 6 major treatment effects of surface plasma treatment equipment can be applied to 100+ industries to improve product performance

Keywords:

Published on:

24 Nov,2021

The 6 major treatment effects of surface plasma treatment equipment can be applied to 100+ industries to improve product performance:
There are often greases, oils and other organic matter and oxide layers on the metal surface, sputtering, paint, adhesive, bonding, welding, brazing, coating, plasma that needs to be treated, and surface cleaning is green and environmentally friendly. Surface plasma treatment equipment plasma treatment has the following effects.

1. Organic matter surface ashing
2. A chemical reaction occurred on the surface
3. Under the high-temperature vacuum state, some pollutants evaporate.
4. Pollution causes high-energy ions to break under vacuum.
5. Since the plasma can only penetrate a thickness of a few nanometers per second, the pollution layer cannot be too thick, and fingerprints are also applicable.
6. Oxidation removal after metal oxide reaction.
The flux of printed circuit boards is usually chemically treated. Chemical reagents need to be removed by plasma after welding, otherwise it will cause corrosion problems. A better combination is easy to weaken the plating, bonding, and welding operations, and the plasma of the surface plasma treatment equipment can be selectively removed. In addition, the bonding quality of the oxide layer is not good.
Metal manufacturing application of surface plasma treatment equipment:
Plasmaization is an environmentally friendly treatment method, which replaces the traditional chloroform.
Automotive manufacturing applications:
Applicable to the pre-treatment of plastic and painting for automobile production.
Application of surface plasma treatment equipment in textile industry:
It is suitable for hydrophilic, hydrophobic and surface modification of fabrics, filter membranes and membranes.
Medical applications:
It is suitable for the pre-treatment of bonding of glass tubes, syringes, urinary catheters and various valves.
Application of surface plasma treatment equipment in the electronics industry:
Clean and etch circuit boards, and perform non-oxidation activation treatment on materials such as films and polypropylene. Pre-treat the surface coating of insulating materials (foam plastic) and electronic components.