图片名称

The indicator light of jet plasma processor is very useful. These knowledge should not be misse

Keywords:

plasma,processing,system

Published on:

16 Aug,2021

The indicator light of jet plasma processor is very useful. These knowledge should not be missed:
Have you ever encountered a jet-type plasma processor that suddenly stops during operation? Don't be impatient at this time. Although the indicator light of the jet plasma processor is small, it is very useful! You may not know that by observing the blinking of the indicator light of the instrument, we can preliminarily determine what is wrong with the atmospheric jet plasma processor. After the judgment is accurate, the problem can be solved by simply checking, confirming and troubleshooting.

plasma processing systemHave you noticed it? When the equipment is working normally, the red LED indicator of the jet plasma processor is always on. When a failure occurs, the flashing state of the LED indicator will also change. How to judge the type of problem of the jet plasma treatment system from the flashing of the indicator light, please refer to the equipment manual provided by the manufacturer at the time of purchase or the manufacturer’s manual provided by the customer service staff. R&D and production, take our own jet plasma processing system as an example, let me introduce you.
Based on the time when the plasma processing system is stopped, the system may stop after a period of operation after startup, or it may stop suddenly after a period of operation.
The fault system of the jet plasma processor and the corresponding LED indicator flashing method and general treatment are as follows:
The red LED indicator flashes slowly, about 1 time per second, indicating that the air source input is faulty and the system protection is turned off. At this time, it is necessary to check whether the air pressure is stable and the related connection pipe conditions.
The red LED light flashes quickly, about 5 times per second, indicating that the electrical system is faulty and the system protection is off. At this time, please check whether the high-voltage wire is damaged, and whether there is any fall off or poor contact; if not, the next step is to check the high voltage of the spray gun Whether the cable falls off, whether the electrode insulation sheath in the spray gun is broken down. If no abnormality is found, it can be determined that it is a problem with the host. Please contact our professional after-sales personnel in time to arrange maintenance during this period.
When the red LED is off, it indicates 220V input failure, please check the 220V input circuit.
If you want to know more about the details of the jet plasma processor, or have questions about the use of the equipment, please click on the online customer service of Chengfeng Zhizao, and Chengfeng Zhizao is waiting for your call!

Hot Products

Related articles