图片名称

NEWS

Popular Articles

Contact Us

图片名称
图片名称

Service Hotline

13632675935

CRF

TEL：13632675935

E-mail：shaobo@sfi-crf.com

Address: 1303, Building 3, Manjinghua Science and Innovation Workshop, No.6 Songjiang Road, Songgang Street, Bao'an District, Shenzhen, China.

What are the use methods of semiconductor vacuum plasma cleaning machine

What are the use methods of semiconductor vacuum plasma cleaning machine

Semiconductor vacuum plasma cleaning machine is a kind of advanced high-tech equipment, cleaning is the use of plasma activation modified etching, improve adhesion effect such as equipment, when used, must be operated in accordance with the requirements of the specification, and some of them use method also need to know what are the knowledge, today will give you the concrete introduce. In the vacuum operation of semiconductor vacuum plasma cleaning machine, we must make the three-way valve pointing to the closed state, that is to say, let the arrow down, and then open the power supply of the vacuum pump, see if the rotation direction of the vacuum pump is clockwise or counterclockwise, if it is clockwise, it is normal, after the detection is completed, and then turn off the power supply. Before starting the vacuum pump, make sure that the vacuum plasma cleaner is connected to the vacuum pump. At this time, the plasma is in the closed state and the plasma chamber will glow after starting. In the pumping, to open the three-way valve, so that it is connected with the indoor air, and then in the needle valve open, pay attention to gently open, let the air slowly into the vacuum plasma cleaning machine cabin, the formation of plasma, and then the front of the control panel power on. During the plasma treatment, the sample should be processed according to the required time. After the treatment, the sample should be closed in RF and cleaned. With semiconductor vacuum plasma cleaning machine, it can be reference to the above content, only the correct operation, does not failure, in addition, after the cut off power supply, also check the plasma cleaning machine after the insurance tube is normal in the safe power supply edge, any traces of the burn out, if there is damage, must change the new matching insurance tube.

MORE +
What are the advantages of atmospheric vacuum plasma surface treatment system to help enterprises save costs

What are the advantages of atmospheric vacuum plasma surface treatment system to help enterprises save costs

With the continuous progress of the society and the continuous development of The Times, China's science and technology has made great progress. Whether it is the science and technology in people's life or in industrial production, it is actually changing people's way of life and improving the efficiency of industrial production. When it comes to atmospheric vacuum plasma surface treatment system technology, it is a kind of material surface activation methods, after modification, the product can be better applied to different fields, now has become an indispensable technology in electronic field, what is the function of atmospheric vacuum plasma surface treatment system what are the advantages of the following is my to introduce the content. 1, environment pollution is very serious in our country at present, so to test whether a technology really useful to society, one aspect is to see whether it will cause damage to the environment, atmospheric vacuum plasma surface treatment system USES a plasma technology, not to use certain traditional solvent for product's surface activation, therefore, effectively avoid the pollution generated by the solvent, is a way of sustainable development, which can be accepted by the society. 2, is for composite materials, can be big to maintain its original performance, because the plasma surface treatment technology in some also often used in the process of pretreatment of composite materials, due to the unique properties of composite materials, processed by conventional methods is very difficult and trouble, because of the composite materials with different thermal conduction and conductive effect, but atmospheric vacuum plasma surface treatment system will not influence on the material, very convenient also. 3, is the plasma surface treatment system can save some equipment input costs, because the main role of the plasma surface treatment system is to change the surface state of the material, therefore, when using the technology, do not need to buy other equipment, and its use is also very wide, can achieve a machine multi-purpose. Now, many enterprises have to atmospheric vacuum plasma surface treatment system had certain understanding, also all know its advantages, so the system of the market is very broad, and he can really improve the efficiency of production, for your company to reduce the production cost, if you want this plasma system enterprise, please act immediately, don't wait until the demand when buy, that will only make you waste more money.

MORE +
Plasma processing which good how to distinguish the use of different types of plasma equipment

Plasma processing which good how to distinguish the use of different types of plasma equipment

Many people who have contact with plasma surface processor know that our plasma equipment is only a general name of the industry. Plasma surface processor is divided into many types, such as atmospheric pressure plasma processing equipment, vacuum plasma processing equipment, wide range plasma cleaning machine, etc. So how can we tell which plasmas are better for our products? Some people do not understand the performance of plasma equipment, may feel that no matter how their products, to consider the cost issue first, and then will give priority to atmospheric plasma equipment. From a professional point of view, atmospheric plasma equipment is not suitable for all products, because it deals with local or relatively flat surface. Therefore, when purchasing equipment, it also depends on what kind of process it is for, and the material of the product, etc., whether it is suitable for using the plasma processor. Vacuum plasma equipment is more commonly used in plasma equipment, which is a kind of equipment widely used. It can clean products in a full range of 360 degrees, whether it is hollow or large area treatment can achieve the effect, and its product performance has reached a very mature level. The vacuum plasma equipment has no effect on the performance of the product. This shows that when customers buy the machine, they can first make a preliminary understanding of what kind of equipment their products are more suitable for. If they do not look at the actual effect, then they will make a choice. The result is not the same, of course.

MORE +
Domestic plasma cleaning machine wholesale machinery production technology to improve the ability of environmental protection

Domestic plasma cleaning machine wholesale machinery production technology to improve the ability of environmental protection

Facing the current serious global economic pressure, and high Labour costs, in order to solve the development of the enterprise in the new environment, the industry is generally believed that should change the original production mode, adopting efficient domestic wholesale plasma cleaning machine equipment to replace the low efficiency of manual mode of production, so that the domestic plasma cleaning machine better play its role in the new environment, green environmental protection so as to win the favor of the market better. The use of non-standard automation domestic plasma cleaning machine machinery for product production and processing, not only can effectively improve the degree of standardization of products, but also can greatly improve the production efficiency of enterprises, reduce production costs. In the production of the use of domestic plasma cleaning machine equipment, to a large extent to help enterprises to solve the shortage of labor, difficult to recruit workers and other problems. If the production of the same number of products, if the use of manual processing, may need ten people, and the use of automatic plasma cleaning machine production technology, only two people about the control equipment can be, while the processing of products than manual processing standardization is much, and the use of short time. The unique domestic plasma cleaning machine wholesale machinery production has so many advantages, why not in the production of vigorously promote the application? The main factors affecting the popularization of plasma cleaning machine are the lack of understanding of domestic plasma cleaning machine and the lack of production technology of plasma surface treatment machine. At present, it is difficult to realize the production of domestic plasma cleaning machine with real high efficiency. Therefore, many enterprises are worried about the production of equipment, worried that they spent a lot of money to buy a plasma cleaning machine, still can not improve the production efficiency, but increased the cost of equipment maintenance. The customer's concern is right, to solve these problems, but also need our professional plasma cleaning machine wholesale manufacturers continue to improve the technical level, produce higher quality products, provide better services, to help customers solve their worries.

MORE +
Application of low-temperature plasma technology treatment process design in packaging process

Application of low-temperature plasma technology treatment process design in packaging process

With the development of SIP, BGA, CSP and other packaging technologies, semiconductor devices are developing towards the direction of modularization, high integration and miniaturization. The main problems of this kind of packaging and assembly process are: organic pollution at the filler bonding area, the formation of oxide film during electric heating, etc. Contaminants exist on the bonding surface, which decrease the bonding strength and potting strength of resin after encapsulation, and directly affect the assembly level and sustainable development of components. In order to improve and improve the assembly capacity of these components, everyone is trying to solve this problem. The improvement practice shows that the application of low-temperature plasma technology in the packaging process can greatly improve the reliability of packaging and the yield of finished products. The bare wafer IC is installed on the glass substrate (LCD) by COG process. After the wafer is bonded and hardened at high temperature, the substrate component precipitates on the surface of the bonding filler during the treatment by plasma technology at low temperature. At the same time, there is often a binder on the binder filler such as Ag slurry overflow component pollution. Using low-temperature plasma technology to remove these contaminants prior to the thermo-pressure interlocking process, the quality of the thermo-pressure interlocking can be greatly improved. In addition, due to the improved wettability of both the substrate and bare wafer surfaces, the LCD-COG module also has improved bond tiGHTNESS, as well as the problem of wire corrosion.

MORE +
IC production integrated circuit manufacturing plasma cleaning equipment process

IC production integrated circuit manufacturing plasma cleaning equipment process

In the IC production of integrated circuit manufacturing process, organic and inorganic combination is a necessary condition to realize the IC production, therefore, how to apply the plasma cleaning equipment technology in the IC production process? First introduce the IC production process. Integrated circuit production process is in a limited environment, artificial participation, that is, the purification room, due to its environmental problems here, a variety of bad environment on the silicon wafer caused by pollution is unpredictable. In general, the common particles, as well as organic matter, and metal residual pollutants and oxides, etc. Plasma cleaning equipment is used to treat the surface of silicon wafer, which can make its adhesive force change, and the physical and chemical reaction is mainly used to reduce the contact between silicon wafer and particle surface, so as to achieve the effect of surface cleaning treatment. In general, impurities in organic matter are produced and exist in many forms, so it is recommended to use plasma cleaning equipment in the production process to clean its surface first, to avoid a large number of problems.

MORE +
< 1...575859...132 > proceed page
图片名称

CRF

National Service Hotline

136 3267 5935

Contact Email

shaobo@sfi-crf.com

Address:1303, Building 3, Manjinghua Science and Innovation Workshop, No.6 Songjiang Road, Songgang Street, Bao'an District, Shenzhen, China.

图片名称

Add WeChat
Get related information

Links

Apply to exchange friend links

Copyright © Shenzhen Chengfeng Smart Co.

京ICP备10002622号-38

粤公网安备 44030602005200号

图片名称

Cheng Feng Zhi Zuang a focus on plasma research and development for 20 years

We

The services of

Inquire for free sample testing

1-to-1 program customization

24-hour online after-sales service

Source manufacturer

Get the program
%{tishi_zhanwei}%
图片名称

Scan the code for information

诚峰智造